1/2 Inch PVC Flex Hose Per Foot Length FLEX-12

1/2 Inch PVC Flex Hose Per Foot Length FLEX-12

1/2" Flex PVC hose for the repair of hot tub spas. The 1/2 inch inner diameter hose typically runs from the pump to the manifold.  Hose too short? You may need a 1/2" coupler as well.

Cut hose with hose cutter, hacksaw or other cutting device for an even cut.  Glue with a fast-drying PVC glue.

This item is PER FOOT of hose length.  If you need 6 feet of hose, please order quantity 6.  If you order 1, you will receive a piece of 1 foot long 1/2" hose.

If you need 10 ft., save with our 10ft roll - we also offer 25 foot rolls.

Shippiing Note: Maximum per piece length: 6 feet.   For all quantities above 6' in length, we will contact you by email prior to shipping on how you would like the hose sectioned off/cut and cut it for you.  If you put the instructions in the comment box when checking out, we will confirm and cut it the way you like.  We can only ship maximum of 6' lengths unless you need longer - but then we will contact you as additional shipping charges from UPS will apply on longer/oversize packages. If you need longer lengths, we offer complete 25 or 50 foot rolls.

You will always have the option to continue with or cancel the order of longer hose lengths once we notify you about any shipping surcharges.

We also sell 50 and 100 foot rolls of 1 1/2 inch hose for larger quantities.

This Schedule 40 PVC flex hose has an inner diameter of 1/2".

We also sell PVC flex hose by the entire roll (25,50 feet).