Ametek 1PH 2HP 115.230V Commercial Air Blower 037935 DR505AW58M

No longer available.

Ametek - (Ametek/Rotron) 1PHASE 2HP 115/230VCommercial Air Blowers. 2HP, 50/60 Cycle, 115/230 Volts, 85 lbs. is part number 037935 and replaces DR505AW58M.

2 HP, 115/230v, 1 Phase, Commercial Air Blower.  Nema rated blower amps -17.6a/8.8a (115v/230v). Max blower amps 26a/13a.

Note that the newer blowers are now Ametek (Ametek/Rotron).  Save by ordering this Ametek model 037935.

Also designed for continuous-running operation in health clubs, condominiums, hotels, motels. Features: Low noise level, Built-in silencers, Direct drive (no belts), Totally enclosed, fan-cooled motors, Cast Aluminum Housing, Perma-Lube sealed ball bearings, Built-in thermal protection, Continuous non-pulsating oil free airflow,

Designed for Commercial Spa Agitation.  This heavy guy weighs about 90 lbs.

Product Features

• Manufactured in the USA - ISO 9001 and NAFTA compliant
• Cast Aluminum blower housing, impeller and cover, Cast iron flanges (Threaded)
• Inlet & outlet internal mu!ing
• UL and CSA approved motor with permanently sealed ball bearings
• Quiet operation within OSHA standards

Special order item - please allow 2-3 weeks for delivery.  Contact us for current lead time/production time.

See the pdf here.

Manufacturer Notes:

Rotron motors are designed to handle a broad range of world voltages and power supply variations.
Our dual voltage 1 phase motors are factory tested and certified to operate on both: 104-115/208-230 VAC-1 ph-60 Hz and 100-110 /200-220 VAC-1 ph-50 Hz.
All voltages above can handle a ±10% voltage fluctuation. Special wound motors can be ordered for voltages outside our certified range.
Maximum operating temperature: Motor winding temperature (winding rise plus ambient) should not exceed 140°C for Class F rated motors
or 120°C for Class B rated motors. Blower outlet air temperature should not exceed 140°C (air temperature rise plus inlet temperature).
Performance curve maximum pressure and suction points are based on a 40°C inlet and ambient temperature. Consult factory for inlet or ambient temperatures above 40°C.
Maximum blower amps corresponds to the performance point at which the motor or blower temperature rise with a 40°C inlet and/or ambient temperature reaches the maximum operating temperature.
Note: The blowers should not be stopped/started more than four times an hour.

DR505AW58M