Aqua Flo XP2 Impeller 1.5 HP 91694150

Aqua Flo XP2 Impeller 1.5 HP 91694150 for Gecko XP2 spa pumps.

This model 91694150 1 1/2 HP impeller has following characteristics:

Closed face impeller is made for the XP2 spa pump by AquaFlo/Gecko.
Rated at 1.5hp, it is used in a XP2 wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.

Shaft seal sold separately - PS-200

Specifications - Closed Face type pump impeller for XP2 pumps

Rated at 1.5 HP (operational horsepower)

Impeller diameter is 4"
Vane width is 5/16" inner diameter

Eye Diameter 2-1/8" (outer)
Eye Length  11/16"

Impeller width is 9/16" (outer diameter)
Seal seat depth is 1/8"
Shaft length is 1 1/2"
Shaft diameter is 5/8"
Seal seat outer diameter is 1 1/4"

Used in XP2 pumps.

The pump impeller is situated inside the wet end of the spa pump. The motor turns a shaft which turns the impeller and that causes water to flow out of the pump discharge. 

This is a closed face impeller made for the AquaFlo/Gecko XP2 spa pumps and used in a XP2 wet end.

Shaft seal kit sold separately if needed - see BSP-200

We also offer replacement wet ends for Aqua-Flo spa pumps as well as the complete replacement pump.

Other XP2 pump parts you may need include:

Wear Ring 92830070

Pump housing oring 165

Impeller Wedge Removal Tool for 48 Frame pump impellers

91694150 replaces 600114 , 91694150 , 91694165.