Aqua Flo XP2 Impeller 2 HP 91694200

Aqua Flo XP2 Impeller 2 HP for Gecko XP2 spa pumps.

This model 91694200 2HP impeller has following characteristics:

Closed face impeller is made for the XP2 spa pump by AquaFlo/Gecko.
Rated at 2.0hp, it is used in a XP2 wet end, and must be installed on a 2.0hp (or greater) thru bolt motor.

Shaft seal sold separately - PS-200

Specifications - Closed Face type pump impeller for XP2 pumps

Rated at 2.0 HP (operational horsepower)

Impeller diameter is 4 3/8"
Vane width is 1/4" inner diameter

Eye Diameter 2-1/8" (outer)
Eye Length  11/16"

Impeller width is 1/2" (outer diameter)
Seal seat depth is 1/8"
Shaft length is 1 1/2"
Shaft diameter is 5/8"
Seal seat outer diameter is 1 1/4"

Used in XP2 pumps.

The pump impeller is situated inside the wet end of the spa pump. The motor turns a shaft which turns the impeller and that causes water to flow out of the pump discharge. 

This is a closed face impeller made for the AquaFlo/Gecko XP2 spa pumps and used in a XP2 wet end.

This impeller must be installed on a 2.0hp (or greater) thru-bolt spa pump motors.

Shaft seal kit sold separately if needed - see BSP-200

We also offer replacement wet ends for Aqua-Flo spa pumps as well as the complete replacement pump.

Other XP2 pump parts you may need include:

Wear Ring 92830070

Pump housing oring 165

Impeller Wedge Removal Tool for 48 Frame pump impellers

Replaces AQF91694200 .