Aqua Flo XP2 Impeller 3 HP 91694300
- SKU:
- 91694300
- MPN:
- 91694300
- Shipping:
- Calculated at Checkout
Description
Aqua Flo XP2 Impeller 3 HP for Gecko XP2 spa pumps. This impeller has 2 green dots on the shaft.
The pump impeller is situated inside the wet end of the spa pump. The motor turns a shaft which turns the impeller and that causes water to flow out of the pump discharge.
This is a closed face impeller made for the AquaFlo/Gecko XP2 spa pumps and used in a XP2 wet end.
This impeller must be installed on a 3.0hp (or greater) thru-bolt spa pump motors.
Shaft seal kit sold separately if needed - see BSP-200
We also offer replacement wet ends for Aqua-Flo spa pumps as well as the complete replacement pump.
91694300 replaces 600111 and 424809 , 5121-34 , AF91694300 , AQF-101-9951.
This impeller is used on pump model 06130395-2040.
2 green dots on the shaft
Other XP2 pump parts you may need include:
Wear Ring 92830070
Pump housing oring 165
Also if the last 4 numbers in the part number starts with a 4 for both XP and XP2 pumps, you may need this impeller as well.
Impeller Type | Closed Face Impeller |
Impeller Diameter OD | 4-3/8" |
Vane Width ID | 7/16" |
Eye Diameter OD | 2-1/8" |
Eye Length | 7/16" |
Impeller Width OD | 11/16" |
Seal Seat Depth | 1/8" |
Shaft Length | 1-1/2" |
Shaft Diameter OD | 5/8" |
Seal Seat Diameter OD | 1-1/4" |
Manufacturer | AquaFlo/Gecko |
Pump Application | XP2 Pump |