Aquaflo Pump Fmxp 2.5hp 2 Spd 230v Coleman 101249

Aquaflo Pump, 2 1/2 Hp, 230V, 2 Speed, 48 Frame, 2 Inch plumbing Intake and Discharge model FMXP/XP2.

FREE Shipping in the contiguous USA.

230 volts - 10.7 amps on high or single speed /3.2 amps on low speed when wired as a 2-speed pump.

Measurement across outer diameter of pump threads is 3 1/16" which corresponds to 2 inch plumbing (ie connects to 2 inch inner diameter flex hose or pipe). 

2 inch plumbing connections on both pump ports, side discharge.

Use Your Existing pump cord or see our cord section for a suitable replacement / see below.

Coleman Spas used this type of spa pump on The Following Models:

2001: 509, 547, 548, 550, 555, 605, 705TL, And 706TL.

2000: 408, 411, 447, 448, 450, 455, And 506.

1998: 208, 247, 250, 255, 260, And 302.

1997: 208, 247, 250, 255, And 302.

1996: 208, 247, 250, 255, And 302.

May be listed as a 5HP (brake torque horsepower) pump which is equivalent to a 2.5HP continuous duty pump.  Best to compare amps rather than horsepower.

Note: the wet end may need to be rotated to fit your specific application.  Shipped in the R12 position with top discharge.

Use o-ring O-43

Need a 2-speed AMP pump cord? See 30-1001C. (14/4 cord)

Pump type also used in LA Spas as either a 1-speed or 2-speed pump - replaces EL-64847.or EL-64846,

Need a 1-speed AMP cord if only connecting the high speed terminal and leaving the low speed terminal unconnected? See 16-2200  (14-3 cord)

When using this pump as a replacement for a 1-speed pump, only the high speed terminal is connected using the 14/3 type cord with low speed terminal unconnected. The line (usually white wire) and ground (green wire)  are always connected.