Balboa 5.5kW M7 Heater G7510 with Sensors

DISCONTINUED - see G7512 which is the same heater but also includes a plug and click cable if needed.

Balboa M7 new model heater G7510 is a 5.5kW replacement flow through heater with 2x M7 sensors.

This 15 inch long heater has 2 inch connections on both sides and includes the M7 sensors (2).  

M7 heater is a 230 volt heater used in SUV, VS and other Balboa control systems.  This is the latest model that replaces older M7 heaters.

This heater operates at 5.5kW/230 volts or 1.375kW at 115 volts. Has 2 inch slip connections on both ends to match up with your 2 inch spa plumbing.

Shipping newest, backwards compatible version of this 5.5kW Balboa M7 heater with 2 integrated sensors included.

This heater is compatible with Balboa control systems with the following numbers:

Note this heater does not include heater tailpieces 417-5050, split nuts for heater unions 0121108020 - or gaskets such as 711-4010 or the popular oring/gasket combination 711-4030 which can be ordered separately if needed.

Need an adapter cable to connect to older Balboa VS Systems?  See 48-0023B

There is also as set of heater jumper straps if needed, see  48-0023

For 2" MBT tailpieces can use-
Tailpiece - 0050107018
O-Ring - 711-4030

For 1-1/2" MBT tailpieces can use-
Tailpiece - 0050106015
O-Ring - 711-4050

1-1/2" Reducer use-
50084