Bath Heater 1.5kW 115V PH101-15UP Jacuzzi® with Cord Plug

Pure Heat inline jetted bathtub heater is 1.5kW and operates at 115 volts. Comes with NEMA power cord and plug included.

Hydroquip bath heater replaces select Jacuzzi® bathtub heaters and 20-16000-10 , 90-221105P , 90-221115P , 912110-P01 , 9218-100 , 9219-104 , BT101-B , C3B4340-D002JUP , C3B5340-E002JUP , CT101-B , CT101-D , PH101-15UP , PH10115UP.

What does this whirlpool bathtub heater do? It helps to keep bath water from dropping below 104 degrees for a nice long bath or where ambient temperature is lower than you would like in the Ensuite or bath room.

Positively the smallest, most compact bath heater on the market today.

Features

• 1.9" stainless housing
• 7" flange to flange length
• 115v model
• Automatic smart thermostat (Factory set to 104 deg.)
• Intelligent high temperature limit circuit (will not trip)
• Heater "ON" indicator light

This compact bathtub heater is also available in other styles including T-Style PH100-15UP , in-line vacuum PH101-15UV, and in-line pressure PH101-10UP and PH101-15UP.
1" socket unions (pressure) or 1-1/2" socket unions (vacuum). Also available in 230 volt models.

• Heater control pressure switch on pressure activated models) OR
• Heater control vacuum switch on vacuum activated models)  depending on which heater is used.  This heater PH101-15UV is pressure type.

Hooks up to 1 1/2 inch plumbing or can be adapted down to smaller pipe sizes.