Blu Water Pre-Filter PF-100 10,000 Gallons 5 Microns

Hot tub water Blu-Water prefilter for spas from the garden hose.  Connects to 3/4 inch hose.

10,000 gallon prefilter uses 5 micron carbon block filteration.

Carbon Spa Pre-Filter
Gets rid of contaminants found in hose water for an easier fill that is better for bathers and spa equipment alike. Initial chemical balancing becomes easier and future stain and scale issues are greatly minimized by using a quality pre-filter.

REDUCES:

This is model PFSPF-1 or PF-100

Great quality and capacity pre-filter design for improving the quality of your hot tub water. This filter is important to use if you are filling your spa from a well water source, or if you have hard water, or are using a Bromine salt system or generator.

Easy to use directions!
Step 1. Attach filter to any standard garden hose
Step 2. Turn on the hose and fill to the appropriate level
Step 3. Balance the Ph and Alkalinity

Follow the start-up instructions in the Genesis manual if using a Genesis salt system

Using a pre filter when refilling your hot tub helps the spa start out right with clear, clean water. Filters out sediment and other nasty elements inside source water that can prematurely clog filters, attach to heater elements, seals and other hot tub plumbing parts.

Whether its just solids from the city water, chemicals, heavy metals from wells or all of the above, our prefilter will help start your hot tub refill off on the right foot.

PF200 , PFSPF-1 , PW-P500

 We also offer lower cost PREFILTER