CG Air Millenium Blower 120v 3 Speed with Heater M3300750120

CG Air Millenium Blower 120v/60Hz, 3-speed with heater and air switch.

M3300750120/60-AMP air blower 3-speed, 9.5 amps at 115 volts.  With AMP cord.

Adaptability: The Millenium is small and light.

Heat: CG Air Millenium Blower The ceramic heater preheats air for body comfort (300w).

Tranquility: The Millenium motor rubber mounts absorb 95% of the motor vibration.

Performance: Twice as powerful as a conventional blower.

Memory: The Millenium blower can use a wide variety of air or electronic controls.

Quietness: The silencer integrated on the Millenium reduces noise to a minimum, 4 pin amp 36" cord.

Note: This blower works on all pipe sizes from 1" to 2" pvc.

Installation Note:  This blower is equipped with an Air Switch.

If that switch is in the off position, the blower will not come on. If an air switch is not present, installer can use a short piece of tubing, connect it to the air switch and blow into it until they here the switch click on ( with the power to the tub turned off….)  - that will put the air switch into the ON position.

Due to its internal design standard replacement air blower motors should not be used on this Millenium Blower.

M3300750120-60-AMP

Need an air blower with a NEMA power cord? See MAST300-750-120/60AN.

M3300750120/60-AMP

contact us for current availability