Complete Whirlpool Bathtub Retrofit Kit 3/4HP Pump Jets Hose Air Control Biscuit

DISCONTINUED, see kit 3-80-5050

This is the complete bathtub retrofit kit to turn your ordinary bathtub into a jetted whirlpool bath.   BISCUIT color.

This complete kit includes the 3/4 HP pump with air switch as well as the pump union, tee, air control biscuit, suction fitting assembly biscuit, 10 feet of tubing, the air button biscuit, 6 bath jets biscuit and even the Jet Tool.

This jetted hot tub bathtub kit includes:

• 3/4HP 120 bathtub pump with power cord and NEMA power plug - 7.5 amp motor with air switch
• 1  Pump Union
• 1  Pump Union Tee
• 1 Venturi Air Control
• 1 Suction Fitting Assembly
• 1 10 foot length of Tubing for connecting the air switch
• 1 Air Button
• 1 Jet Tool - jet wrench for classic and econo jets by Waterway
• 6 Bath Jets

 Includes a jet tool - wrench too.

This tool is made by Waterway.

All Fittings are "Biscuit" color.

We also offer this entire kit in chrome if you like for about $40 more.

Includes the air button, jets, suction, valve and 3/4HP pump with cord and plug. (pump is 120v).

Please note that the 2 barb connectors in the suction side of the pump may need to be drilled out if needed - otherwise they can be plugged if not needed. (Most new pumps have this sealed with option to drill out and use these additional 2 barb ports if needed).

Need a heater?

You can use a standard bath heater.  You have two options  - Vacuum side installation or Pressure side installation.  This heater is made to help maintain the water temperature.

Heater In Line – vacuum side

935213-23

Kit includes all of the above and does not include pvc flex hose or pipe.

Hydroquip Heater

PH101-15UP

contact us for current availability