Cover Classic Bar Style Cover Lifter

Cover Classic bar type cover lifter has a bottom mount.

Fits covers up to 96" wide! This lifter can attach to either the back wall of the cabinet or the pedestal base if the spa has one.

Both are bottom mount pivot rod style cover lift device to allow one person to comfortably remove and replace the spa cover.

Stowes next to spa when open.  If there is wood along the base, the bottom will mount there.

This bar style cover lifter goes by different names such as Cover Classic, Cover Basix Pro or even CRS201, CRS3 or 58328-000-000, but it does a great job of allowing one person to remove and stowe a spa cover with assistance of a center bar.

Rod style cover lifter that mounts to bottom on one side. Requires side clearance on 2 sides for the bars and rear clearance to stow the folded over spa cover.

Easy and Simple to Install
Proven Traditional Design
Bottom Cabinet Mount
Pivot Type of Lift
Clearance Requirements: 18" Back x 3" on Sides
Bottom Mount and handles up to 99"
Maximum Cover Width: 96 inches wide.
Not suitable for sunken or inground spas.
Mount: Spa Side or Deck
Optional brackets available for round spas and under cabinet applications.
Cabinet Shape Limitation: Must use the under spa brackets for round, hex and octagon spas.
Aluminum Construction and powder coated

Includes hardware and 2 standard cabinet mounting brackets. (Undermount type brackets also available and sold separately).

This lifter attaches to spa skirt or pedestal.

Need to mount it undermount style?  The under spa brackets 8-05-0093 for this Classic lifter are also available (sold separately).

2 cabinet Mounting Blocks and mounting hardware included.

Complete Cover Classic lifter kit comes with:

• 4 Corner Pieces
• 2 Side Arms (42")
• 2 Bridge Arms (59")
• 2 Mounting Blocks (pictured below)
• 2 Retaining Chains
• 2 Chain Brackets
• 30 Metal Screws (#10 x 5/8")
• 6 Wood Screws (#8 x 5/8")
• 8 Wood Screws (#8 x 1 1/4")