Cover Roller Spa Cover Lifter XL For Large Spas 3 Arms

Item currently unavailable. Contact us for options.

The Cover Roller hot tub cover remover is an entry level cover assist that works with large spas.

This is the heavy duty XL version of the Cover Roller that comes with 3 arms for added support of large spa covers.

We also offer the standard Cover Roller with 2 arms and the Swim Spa Cover Roller with 6 arms.

This device is not really a cover lifter, but assists in the removal and replacement of the cover and is easy to install.

This Cover Roller allows you to slide the cover away from the top of the spa like a cover shelf, without lowering or raising it.

The cover is stored in the horizontal position, away from the spa and can be pushed over from the inside or pushed back on top of the spa from the outside.

This Roller requires clearance on 1 side of the spa about 1/2 the width of your cover as the cover, folded in half, sits off to the side.

The cover will slide all the way off of the spa to allow the whole tub to be open. The arms are mounted slightly upward, so there is no risk of the cover falling over.

The Cover Roller XL includes a manufacturer's limited lifetime warranty. 

Polycarbonate construction reinforced with fiberglass.

Benefits of Cover Roller XL:

• Easy to install and operate

• 4 Rollers on each arm to assist in sliding the hot tub cover on and off of the spa

• Easy to push hot tub cover from stored position

• Arms fold down against the spa when not in use

• Weatherproof durable polycarbonate material

• Completely assembled - requires only a screwdriver to mount in place

Advantage is that this type of roller/shelf system allows cover to remain horizontal so it does not block view.  If you want to block the view, see the top mount cover lifters at Hot Tub Outpost. 

If you don't want to block the view and want the lifter to fold down next to the spa, see our cover removal systems such as Cover Captain (bottom mount).