Cover Roller Swim Spa Cover Lifter 6 Arms CRS5-SS

The Cover Roller swim spa cover remover is a cover assist device that works with swim spas that have covers opening on both ends. This Roller comes with 6 arms (3 on each side).

This is the Swim Spa version of the Cover Roller that comes with 3 arms on each side (total of 6 arms) for added support of large swim spa covers.

We also offer the standard Cover Roller with 2 arms and the Cover Roller XL with 3 arms for large hot tubs.

This device is not really a cover lifter, but assists in the removal and replacement of the cover horizontally and is easy to install-  more like a cover holder.

This Cover Roller allows you to slide the cover away from the top of the swim spa like a cover shelf, without lowering or raising it.

The covers are stored in the horizontal position, away from the spa and can be pushed over from the inside or pushed back on top of the spa from the outside.

This Swim Spa Cover Roller requires clearance on the 2 endcs of the swim spa about 1/2 the width of your cover as the cover, folded in half, sits off to the side.

The cover will slide all the way off of the spa to allow the whole swim spa to be opened on both sides.

The arms are mounted slightly upward, so there is no risk of the cover falling over.

The Cover Roller SS includes a manufacturer's limited lifetime warranty. 

Polycarbonate construction reinforced with fiberglass.

This is the easy way to move the cover away from the top of your swim spa.

This unit is strong enough to hold a heavy cover - even waterlogged covers (although if your cover is water logged you will need to dry out or replace the inner lining.

Works with heavy duty covers that are even 4-6 inches thick.

Support your large covers with the 3 bars on each side.  (total of 6 bars included - each with 4 rollers on them)

Benefits of Cover Roller for Swim Spa

• Easy to install and operate

• 4 Rollers on each arm to assist in sliding the hot tub cover on and off of the spa

• Easy to push hot tub cover from stored position

• Arms fold down against the spa when not in use

• Weatherproof durable polycarbonate material

• Completely assembled - requires only a screwdriver to mount in place

• This swim spa kit comes with 6 rollers -  3 for each side.

Advantage is that this type of roller/shelf system allows cover to remain horizontal so it does not block view.

Features:

• No assembly required. Only needs a screwdriver to mount to spa.
• Six (6) Arms - too be mounted anywhere on the swim spa perimeter
• Made from a poly-carbonate material reinforced with fiberglass.
• The only cover remover with a patented Easy On / Off Roller design.
• 20 Years in production.
• Requires 1/2 width of the cover behind the swim spa.
• Folds up snugly against the swim spa cabinet while not in use.
• 4 rollers on each arm that make it a “snap” to slide.
• Limited Lifetime Warranty
• • Type of Assist: Roller Design
  • Cabinet Shape Limitations: None
  • Mount: Spa Side
  • Not Suitable for Sunken or Inground Spas
  • Clearance Requirements: At Least Spa Cover Folded in Half
  • It may be required for your installer to insert a 2"x4" wood stud behind the spa's cabinet for extra support where the position of the Cover Roller Racks are going to be screwed onto the cabinet/skirt.
  

 CRS5-SS