DreamMaker Aquarest 1.5HP 1-Speed 120V Pump 403468-2 403468-3

Factory original DreamMaker and Aquarest spa pump.  You will receive the new revised current model replacement side discharge pump - original DreamMaker.

Note: Now shipping version 3 or 403468-3 when ordering this factory recommended replacement pump. 

This pump is a side-discharge pump. Need a center discharge instead? Add an order comment "Center Discharge Version" when placing the order and we will send the Center Discharge version or see 403627.  Otherwise you will receive the standard side-discharge with the top/discharge off-center.

403468-3 Replaces 403468-2 and the older blue pump 403468-1 that had following specs.

• 1.5HP
• 1-Speed
• 115-120 Volts
• 9 amps
• 3425 rpm
• 60 hz.
• 1 1/2 inch plumbing connections (ie. connects to 1 1/2 inch inner diameter hose or pipe) Actual connection size is larger to accommodate 1 1/2 inch i.d. hose
• For Post-2014 spas
• Pump Cord with AMP connector included
• DreamMaker part number 403468-3 (WBC pump) replaces 403468-2
• FREE SHIPPING in the continental USA
• Authentic part - Original Factory warranty
• Now shipping version 3 - side discharge for 1 1/2 inch plumbing. (about 2 7/16" across pump threads)

This is the newest replacement pump that is the factory original DreamMaker replacement.  Plumbing may need to be moved slightly to line up with new pump.

Replaces discontinued blue pump and also the pre-2014 single speed, 1.5HP pumps (03510631-2). Note that if replacing an older style pump, this pump is the currently supplied factory replacement. The pump maybe a little shorter. You will only need to bolt the front two feet and may need to pull the hose forward to fit the wet end. New, shorter pump has a box on top and a side discharge.

This one is a more efficient pump that operates at just over 9amps/120v.

This is the current factory recommended, newest replacement model pump. It may require moving the pump/plumbing as per below in order to line up existing plumbing with the current replacement pump.

Free Shipping to anywhere in the continental U.S.A.

Weight: 21 lbs.

Replaces 403468-1 303468-2, 303468-3 and 03510631-2 pumps.

If using this new version 403468-3 to replace 403468-2 in 500 model, see below - all others will be a direct fit.

Previous version 2- 403468-2 photos below:

This pump is about a foot long. You may need to move one of the hoses closer to connect.  This is the original, currently shipping DreamMaker Spa factory pump that also replaces 1014310.

This connection is for a "1 1/2 inch plumbing union" which actually measures about 2 inches on the union to accommodate 1 1/2 inch inner diameter hose or pipe that connects to the union that goes on the threaded part of the pump.
The threads measure about 2 7/16" across.
The 1 1/2 inch refers to the inner diameter of the hose and not size of this union or threaded connection.

Pump comes complete with original cord and AMP plug.  There are 3 wires as this is a 1-speed pump. (A 2-speed pump would have 4 wires).

There are still 4 pins - only 1 is not connected since it is a 1-speed pump.  Fits into your 4-pin socket on the circuit board or spa pack.

Both union sizes are the same and accommodate 1 1/2 inch plumbing.

We also offer 406611 gaskets and 461257 pump unions for this pump as needed.

You may also be able to use center discharge pump 403627, or you can request this model be sent in a Center Discharge version by adding an order comment when placing order "center discharge version".

Standard order for this part will be a side discharge pump.  If specifying Center Discharge Version in the order notes at checkout, you will receive the Center Discharge version of this pump instead.  If there is no comment, you will receive the side discharge pump as pictured.