DreamMaker Spa Pump 1.5HP Center Discharge 120v 1-Speed

303468-1 spa pump 1HP/1.5HP, 120 volts has a CENTERDischarge. (discharge port for 1 1/2 inch plumbing (about 2 7/16" across pump threads) comes out the center/top of wet end.

FREE SHIPPING on this authentic factory pump.

Wet end can be rotated in 90 degree increments to line up with existing plumbing.

This is a center discharge type pump model that is rated 1.5 MBHP (brake horsepower) and 13 amps, single speed 120v.

Original factory currently model replacement center discharge pump replaces the discontinued red center discharge pump.

48 frame, 120 volt replacement spa pump with 1 1/2 inch male buttress threaded unions. Rated at 13 amps.

This replacement pump comes with AMP cord and plug included.

Need a side discharge model? See the AR-15-120V for the newer model replacement pump for 2014 and later models where the discharge pump connection is off to the side instead of in the middle. 

Note that if your spa pump is under 12 months old, it may be covered under the existing manufacturer's warranty.

This pump can also be used to replace the discontinued blue pump 1034205 and replaces 1014305. Same as 403627.

Old version of this pump was red, newest model is black.  Flat top box on top.

Now shipping the latest version of this pump  with center discharge to line up with existing plumbing. Get this original spa part for your DreamMaker spa right here at Hot Tub Outpost.

Includes 1-speed, 4-pin, 3-wire AMP cord.  Replaces 3010410-1M6T  .

Connects to 1 1/2" inner diameter hose/plumbing.  Measures about 2 7/16" across pump threads.

Need unions? See 0602-15