EL2000 Mach 3 M3 Circuit Board Balboa 53834-04

Balboa EL2000 Mach 3 circuit board model BAL53834-04.

This circuit board is only for a plastic Balboa enclosure/pack and will not work with metal box.

This M7 system by Balboa does not use a pressure switch.  This circuit board is also used by several hot tub manufacturers including ThermoSpa.

This part is for the circuit board only and does not include the plastic enclosure, heater or other spa pack components.

This board also replaces the Hydroquip EL2000/8000B series circuit board 33-0029-K and 55001,54302 and the board used in spa pack 54301.

Replaces 3-60-0176 101-982 (Coleman) 53834-05 (Balboa) 59-138-1017 and all versions of the 53834 circuit board.
Replaces 33-0029-K , 33-53834-K , 52680 , 53834-04 , EL2000_EL2000M3R2, Mach3 , EL2000M3R2D , EL2000R1B , TS2000R2A.
Chip Number - EL2000M3R2(x)

Note Chip # TS2000R1A corresponds to the Balboa EL2000 Mach 2 circuit board while TS2000R2A corresponds to the Balboa EL2000 Mach 3 circuit board. The difference is the position of the mounting holes.  This is the Mach 3 circuit board M3.

Please note: Circuit Boards are non-returnable items as they cannot be resold to another spa owner as new. On the bright side, you will also know that the board you receive is pristine, factory new and has never been installed before. See our return policy for further details. Circuit boards ARE COVERED under original MANUFACTURER'S WARRANTY.

We also offer Mach 1 and 2 boards. Contact us if you require assistance.

Contact us if you need assistance in determining the correct board for your spa control system.