Emerald Spa Control Panel DS-2 91007300

Emerald Spa DS-2 control panel 91007300 with 6 buttons and LED readout.

Emerald Spa overlay sticker with self-adhesive backing included!  This control is made for Emerald by Balboa and is the DS-2 panel.

We also offer the SS-2,SS-3 control panels and the DS-4 type control panel with 8 buttons.

6 button overlay with same button layout as discontinued Emerald overlay will be shipped with this item.

Buttons include: Jets - Blower - Light - Mode - Warm Cool  (see new style photo above)

6 button control includes Balboa overlay with same button layout.

Need a circuit board for DS2 or DS4?  See part 91006100 or contact us for assistance.

Start-Up

This spa control has been specifically designed so that by connecting the spa to its properly grounded source, the spa will function properly and safely at 100 degrees F. (default startup mode) 
When the spa is first activated, the LCD will display the current spa temperature and COOL in the display window if the water is 20 degrees F cooler than the set temperature.
During each filter cycle, the spa will heat to the set temperature. 

Keypad buttons include temperature controls up and down (60 - 104 degrees F) on the right of the LCD screen.

To the left of the LCD screen are 4 buttons:  Jets (press once for low speed, again for high speed and again to turn pump back off), Blower (press multiple times for various blower speeds or to turn blower off), Light and Mode.

The mode button is used to switch the control panel between Standard and Economy modes.

DS2 control panel messages can include: