Emerald Spa IN.XE 5-Output Spa Pack System Controller 2 Pumps 51004000

Emerald Spa/Gecko Aeware system controller in.xe with 5 outputs. This pack is the factory original replacement spa controller for Emerald and Great Lakes spas that use the in.xe controller with 2 x 2-speed pumps. We also offer the simpler 3 output spa pack for single pump units.

Does not include topside control panel.  Includes 4kw heater.

Retrofit Note when replacing the 1 pump system 51001000, when powering up, just turn the power on to set the low level programing to LL1, then press the program key and it will lock it in for the one pump system.

The in.xe is the perfect spa control system for entry level spas that have up to two pumps or two pumps and a blower or single pump or single pump and a blower along with accessories.

• 2 output connectors for pumps - controls 2x 2-speed pumps (or 1x 2-speed and 1x 1-speed pump)
• 2 connectors for relay controlled outputs: ozonator and circulation pump or blower
• 1 connector for direct 120/240 output (in.power.210) - (output voltage of direct connection is decided by the in.link cable used)
• 1 connector for main keypad - works with keypads in.k200, in.k19, in.k35, in.k450 and in.k600 static (keypads not included)
• 1 communication link connector (in.watch or in.stik)
• 1 connector for 12v light (coolrays)
• Integrated 4kW heat.wav heater (also available with optional 5.5kW heater in a different configuration)

Waterproof in.link connectors and plugs help eliminate problems associated with mis-wiring component connections.

This IN.XE spa pack is used in select Emerald Spas and by other brand hot tubs. We also offer the 3-Output version of this spa pack to accommodate 1 pump.

This is the original Emerald Spa replacement pack and the new model looks like above - if port access is needed, remove the port access plugs.

Also used in Dynasty Spas