Emerald Spas MC2 MC4 Gecko M-Class Control Panel 50012500

This item 50012500 has been discontinued by the factory.  A rectangular replacement control panel is available - see 50012550

Emerald Spa MC2 and MC4 system, original 7 button Gecko M-Class control panel with overlay comes with cord and plug (pin type that connects to circuit board) are used in Emerald Spas Estate Series and other hot tubs.

Buttons include temperature up and down, program, pump(s), blower, mode and light. There is a screen as well for this oval control panel.

This panel is for Gecko control systems used in Emerald Spas.

This control panel comes with original Emerald Spa graphics overlay included.

Free Shipping!

50012500 part number is an original Emerald Spa replacement part as supplied by the factory- not a substitute off-brand item.

Operation:

Press Pump(s) to turn Pump 1 on at low speed. Press the Pump(s) button a second time to turn Pump 1 on high speed. A third press turns Pump 1 & Pump 2 on high speed.

A fourth press turns both pumps off and the cycle begins again with the next button press. A built-in timer turns pumps off after 15 minutes (pump timeout), unless it has been manually turned off first.

This panel can also be locked and unlocked by pressing and holding the Pump 1 key for 5 seconds. Then display shows LocP or LocF (partial or full lock).  So to unlock, just press and hold the pump 1 key again for 5 seconds.

Switching modes between standard and economy is also easy. Access the programming with the Mode button.

We also offer this factory original topside panel for the Emerald Manor Series.