Four Winds Drain Cap FW6046

Part is no longer available

Original Four Winds spa drain cap FW6046 as used in Maui and other model spas made by Four Winds.  Special order item.

We offer complete drain valve assemblies including 25212-104-000 and other CMP drain valves.

Draining a Four Winds Spa

Draining a spa involves using pliers to hold onto the handle on the cap and pull it straight out. Then turn it about 1/4 turn to the left and then pull out about 3 inches. This locks the tube in place so you can remove the cap and not lose water.

Attach a water hose to the tube and push tube in about half way and drain the water as needed. When done, pull tube out about an inch or so and remove the hose, install the drain cap and push the tube back in until it stops.  Then twist it to the right and push in to hide it away.