Freeflow Watkins 303030 VS300 Spa Control Pack VS300 with 4kW Heater

FreeFlow Watkins controller 303030 or WAT3030303 model VS300 system control box with 4kW heater.

Power requirements: 120/240 VAC  60hz, 16/32A, Class A GFCI-protected service (circuit breaker rating = 20A/40A max)

3 wires (hot, neutral, ground)/ 4 wires (hot, hot, neutral, ground)

This version of the VS300 spa pack is the exact replacement configuration and part for Watkins Freeflow spas.

Freeflow Spa VS300 System Outputs

• 120v pump 1, 2-speed
• 120v ozonator (ozonator voltage must be same as pump 1 - ozone runs with pump 1 on low speed)
• 12v spa light
• 4.0 kW heater at 240v (if running 120v, heater output is about 25%)

Circuit board not available separately.