Gecko DTEC-1 2PSI 1/8 Inch 5V Pressure Switch 510AD0167 S-Class M-Class Emerald Spa

1/8 Inch mpt (male pipe thread) 2.0 PSI 5V Gecko Pressure Switch 510AD0167.  Now shipping the new model 2PSI switch 510AD0249

Old pressure switch part number is discontinued -and now replaced by 510AD0249 new model with metal case which you will receive when ordering this 2PS switch.

New Model now has a more robust Metal Case and ships in silver instead of brown.

Rated at 1-5 psi.  1A switch amperage.  SPNO single pole normally open.

This 2 PSI pressure switch type also fits in the Gecko systems that use a black box mounted on top of the heater.  This one is designed to fit in the limited space.

This 5 volt Gecko DTEC-1 pressure switch also replaces models 510AD173 and 845220.

Old discontinued version replaced with new model that is silver instead of red.

This pressure switch is used on Gecko M-Class and S-Class spa control systems found in Emerald Spas, Great Lakes Spas, Polynesian Spas and other brand hot tubs.

Also used in Len Gordon packs, HydroQuip and Spa Builders packs.

The switch is identical to this one - only color is different depending on which warehouse we ship from. Specs are exactly the same.  You probably will get one that looks like this here and on bottom, but if a pretty red one shows up, it is just the dye in the plastic on an identical pressure switch - so order with confidence.

Pressure switch rating is 1 to 5 psi and the pressure switch amperage is 1 amp.

The plumbing connection size is 1/8".  The connection is male pipe thread (mpt) and male national pipe thread (mnpt) and the Pole/Throw is Single Pole normally Open (spno). The pan material is plastic and this is for Gecko systems. 

This pressure switch is identical to 510AD0167 ,  800240-3 ,  800315-3 ,  800320-3.

This type of pressure switch is used in Coast Spas, Emerald Spas and other brand hot tubs.

Electrical specifications: Switch rating / 1 Pole NO:   5V, 0.4 VA

Have a question? Contact us for a speedy response.  Thanks for browsing at Hot Tub Outpost.

Need teflon tape? Best to wrap the threads of the pressure switch with teflon tape to assure a good seal at the pressure switch tap on the heater manifold.

This DTEC pressure switch is a 2PSI 120v switch (aka DTEC1 and DTEC-1) and now shipping as 510AD0249 with metal case, still 2PSI, 1 amp, 1/8 inch mpt threads.

Replaces 800318-3 DTEC 1.5PSI 120V