Gecko IN.YE-5 Pack with IN.K19 2-Pump Control Panel

This bundle has been updated. Contact us for assistance .

Gecko Alliance IN.YE-5 spa pack control system with 4kw heater and includes the IN.K19 2-PUMP TOPSIDE & AMP Cords.

Replaced by newer model

This complete spa pack includes built-in heater probes and is programmable via the keypad topside control panel (included in this bundle).

This spa pack features self-diagnostics and solid state water flow detection.

Features:
Built in Heater Probes
Programmable via Keypad
Self Diagnostic and Solid State Water Flow Detection
WiFi Ready- In.Touch 2 (Sold Separately if needed see 0608-521020)

Bundle Includes:
0610-221046-355
Control: IN.YE-5

BDLK192OP
Topside Bundle with Overlay: In.K19 (P1, P2, L, Temp)

95100519 (x2)
Dual Speed Amp Cords

95100517 (x2)
Single Speed Amp Cords

9920-400489
Light Socket with 8' Cable, MTA-156 3-PIN

9917-102053
Adapter Plate

Operates:
Convertible 120/240V
Heater: 1.0/4.0KW
Pump 1: 1 or 2 Speed 120/240V
Pump 2: 1 or 2 Speed 120/240V
Blower/Pump3: 1 Speed 120/240V
Circ: 120/240V (see note)
Light: 12V
Ozone: 120/240V (see note)

Note: If using both Circ and Ozone, must be in same voltage and will need AMP Splitter Harness
(Sold Separately) 9920-401369

This bundle includes K19 topside control panel and overlay P1, P2, L, TEMP

Gecko Y-Series Controls - Spa Paks

This easy and flexible spa pak with heater has many Gecko technologies including:

• in.put - the terminal block
• in.seal - the watertight protection of the case including connectors and power box to avoid any direct contact with electrical components (IXP5 standard)
• in.stik - the automated software upload similar to USB stick, this technology connects the spa pak for data upload automatically
• in.touch - this feature supports the in.touch WIFI system so you can use your favorite iOS device to communicate with your spa (WIFI system sold seperately)
• in.flo - dry fire protection and safety systems located on the heat.wav heater
• in.t.cip - the water temperature algorithm with automatic heater start time adjustment
• in.link - the proprietary connections as used by low voltage components such as keypads and accessories

 The on board system connections are industry standard AMP connections. The pack has a watertight strain relief system for snuggly holding cables in place with enough outputs for all your hookup needs.

The pack is 16 1/2 inches wide, but end to end including the heater unions it measures 19 1/2 inches wide.  The height is 10 3/4" and the depth is 5".

The center of heater unions are about 2.85 inches off the ground.

Comes with mounting feet for floor installation. Can also be installed on the wall.

Features:
Built in Heater Probes
Programmable via Keypad
Self Diagnostic and Solid State Water Flow Detection

GECINYE5-K19BUNDLE replaces 3-72-7039

Need a factory original Emerald Spa control panel to go with this IN.YE5 pack? We offer those too.  We also offer IN.YE3 packs.