Gecko IN.YE-5 Pack with IN.K300 Topside
- SKU:
- GECINYE5-K300BUNDLE
- MPN:
- GECINYE5-K300BUNDLE
Description
DISCONTINUED - see our other in.ye5 bundles like:
in.ye-5 pack with a k450 control panel 0610-300003
in.ye-5 pack with a k200 control panel 0610-300004
in.ye5 with the k8 control panel 0610-300006
Or see the spa pack by itself in.ye-5 with 4kw heater 0610-221046-355
Gecko IN.YE-5 Pack with IN.K300 Topside (not pictured)
Gecko Alliance IN.YE-5 spa pack control system with 4kw heater and includes the IN.K300 Control panel & AMP Cords.
This complete spa pack includes built-in heater probes and is programmable via the keypad topside control panel (included in this bundle).
This spa pack features self-diagnostics and solid state water flow detection.
Features:
Built in Heater Probes
Programmable via Keypad
Self Diagnostic and Solid State Water Flow Detection
WiFi Ready- In.Touch 2 (Sold Separately if needed see 0608-521020)
Bundle Includes:
0610-221046-355
Control: IN.YE-5
K300 topside is 6-1/4” x2-1/4”
Topside Bundle with Overlay: In.K300
95100519 (x2)
Dual Speed Amp Cords
95100517 (x2)
Single Speed Amp Cords
9920-400489
Light Socket with 8' Cable, MTA-156 3-PIN
Operates:
Convertible 120/240V
Heater: 1.0/4.0KW
Pump 1: 1 or 2 Speed 120/240V
Pump 2: 1 or 2 Speed 120/240V
Blower/Pump3: 1 Speed 120/240V
Circ: 120/240V (see note)
Light: 12V
Ozone: 120/240V (see note)
Note: If using both Circ and Ozone, must be in same voltage and will need AMP Splitter Harness
(Sold Separately) 9920-401369
Gecko Y-Series Controls - Spa Paks
This easy and flexible spa pak with heater has many Gecko technologies including:
- in.put - the terminal block
- in.seal - the watertight protection of the case including connectors and power box to avoid any direct contact with electrical components (IXP5 standard)
- in.stik - the automated software upload similar to USB stick, this technology connects the spa pak for data upload automatically
- in.touch - this feature supports the in.touch WIFI system so you can use your favorite iOS device to communicate with your spa (WIFI system sold seperately)
- in.flo - dry fire protection and safety systems located on the heat.wav heater
- in.t.cip - the water temperature algorithm with automatic heater start time adjustment
- in.link - the proprietary connections as used by low voltage components such as keypads and accessories
The on board system connections are industry standard AMP connections. The pack has a watertight strain relief system for snuggly holding cables in place with enough outputs for all your hookup needs.
The pack is 16 1/2 inches wide, but end to end including the heater unions it measures 19 1/2 inches wide. The height is 10 3/4" and the depth is 5".
The center of heater unions are about 2.85 inches off the ground.
Comes with mounting feet for floor installation. Can also be installed on the wall.
Features:
Built in Heater Probes
Programmable via Keypad
Self Diagnostic and Solid State Water Flow Detection
GECINYE5-K19BUNDLE replaces 3-72-7039
Need a factory original Emerald Spa control panel to go with this IN.YE5 pack? We offer those too. We also offer IN.YE3 packs.