Gecko M-Class Spa Pak Controller AMP Connections 3-74-7035

DISCONTINUED

This pack is discontinued  but we still offer the circuit board 0201-300014

To replace a complete system - see the current model in.yt System with a K800 or K1000 controller.

See system in.yj system 0611-221031-361 and either a control panel in.k800 or in.kl1000 both work with the new control box/system.

 Gecko MSPA M-Class Spa Pak Controller with 5.5kW, 220v heater version MC-MP-P122-P222-P312-B1-O1-CP1-NE-A11-A21-LS-H5.5-RTC-T2-AMP-SBD works with TSC-8 (8 or 10 keys) or TSC-4 (8 or 10 keys) keypad.

 DISCONTINUED M-CLASS pack

This Model M-Class spa pak features has provision for pump 1 being a 240 volt, 2 speed pump, pump 2 being a 2 speed pump at 240 volts, pump 3 being a 1 speed pump at 240 volts.

It further accommodates a 120 volt blower, a 120 volt ozonator, a 110 volt circ pump with no error code on the display (NE). Provision for 1x12 volt light, a 5.5 kw 2 1/2" horizontal heater, AMP cord connections and Fiber Optic or Aux .

If you are replacing a spa pak, this info above should match or you can send us the code from the EPROM chip such as 9936-100287A so that we can match your pack.

So this pack will run 2 x 2 speed pumps and a third 1-speed pump plus a circ pump and blower.

This particular pack has the AMP connectors, but we also offer a pack with J&J connectors if needed (see 3-74-7036). This spa pack works with either TSC-8 or TSC-4 topside control panel by Gecko (not included).

See topside control panels K-8 8 button topside BDLTSC8GE1 or the 10 button version BDLTSC810K if needed.

MC-MP-P122-P222-P312-B1-O1-CP1-NE-A11-A21-LS-H5.5-RTC-T2-AMP-SBD.
Note that heater is 5.5kW at 240v and 1.5kW at 120v.
The pumps can also operate at either 120v or 240v.
The light circuit is 12v/fiber optics.

Controller has AMP receptacles.

Topside control and AMP cords sold separately as needed.

Factory warranty is 2 years.

Free shipping!

We also offer the Circuit board replacement kit for MSPA-1 and MSPA-4 - see 0201-300045.

Cords available for dual speed 95100519 (uses 2x)  or single speed pump cord  95100517 (uses 2x)

Need the control box with mini J&J receptacles instead? See 3-74-7036 .