Hi Limit 12 Inch Capillary 1/4 Inch Bulb 25A Screw Terminal 275-3287-00

DISCONTINUED - see 275-2662-00

Invensys Appliance Controls hi limit with 12" 1/4" bulb,

Standard hi limit. Single pole rated at 25 amps with temperature rating set at 121 Degree F.

12" capillary length, 1/4" bulb thickness/diameter.  Bulb length is 4 inches.  Capillary length is 12 inches.  SPST 25 A screw terminal connection.

Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater.

This is a safety device! If found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one.

Hi Limits
Single pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater
12" capillary length, 1/4" bulb thickness
This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one

Replaces "H-L1/4""-12""" , 275-2662-00 , 275-3148-00 , 303016 , 50-1001 , 611549 , 9135-03C , H-L1/4-12 , IAC275328700 and,275-26200.