HydroQuip CS6206 Spa Pak 4kw Heater Lo-Flo Circulation with Control Panel

This complete replacement spa pack CS6206-Special for systems with circ-pumps by Hydro Quip includes the ECO6 topside control panel and installation kit with instructions.

This hot tub control system includes the external 4kw heater and ECO-6 topside control panel.

The heater can operate at 1kw in 120v systems or 4kw in 230v systems.

Most systems are wired for 230v with external GFCI and use this heater as a 4kw heater.

Attach circulation pump using instructions provided with this complete spa pack kit.

This Hydro Quip Lo-flo circulation system model CS6206-U-LFC includes the 4kw heater, control pak and topside control panel.

This spa control system will operate a 2 speed pump AND either a blower or a second 1-speed jet pump as well as operating the circulation pump, ozone & light.

System comes with the topside control panel and installation kit.

Control System Specifications:

• 1.0/4.0kW “Lo-Flo” Versi-Heat Heater Assy 19.25" with 60” Cord
• Titanium Low Watt Density Heater Element
• EZ Access Foot Bracket
• Spaside Control ECO-6
• 12V Light Assembly
• Heater “ON” Indicator Light
• Titanium Low Watt Density Heater Element
• Flow Switch Control
• Installation Kit Included (see below)
• 3/4” x 1” Barb Adapter
• Smart-Econ Economy Mode Settings
• Smart-Freeze Protection
• Pressure Switch Protected
• Lighted Smart Cords
• “VDS” Visual Diagnostics (not on CS7506)
• US and Canada UL Recognized
• Model CS6206-U-LFC-Special
• Detailed Owners Manual &Wiring Diagram
• 2 Year Manufacturer's Warranty

We also offer optional circ pumps that work with this system including Laing and Grundfos 24-hour circulation pumps.  The Special bundle includes all the mounting accessories needed (details below).

The installation kit includes:

• Spaside Control
• Spaside Adapter Plate
• 48” Component Cords - 8.5”L x 3.5”H
• Flow Switch Tee Assy
• 3/4” Clear Tubing
• Stainless Steel Clamps
• 12V Light Assembly
• 3/4” X 1” Barb Adapter

Hydro-Quip ECO-6 topside control panel comes with an 8 pin connector and attached 10' cable.
Topside Panel Buttons: Jets, Auxiliary, Light, Temp
Panel measures 2-1/2" x 5"

SYSTEM SPECIFICATIONS :
Electrical INPUT Specification: SINGLE PHASE,120/240VAC, 60HZ

• SINGLE PHASE
• 120/240VAC
• 50/60HZ

Electrical OUTPUT Specification:

• PUMP (S) 13A
• BLOWER 8A
• OZONE 2A
• Circulation Pump 5A
• 12V LIGHT 1A
• HEATER 23A

SYSTEM Dimensions: 13”W x 9.25”H x 4.5”D

Dimensions of control box & shipping weight:12.5”W x 11”H x 4.25”D  / 21.8 LBS

This system will operate a circulation pump, a Pump 1 at 2-speeds, a Pump 2 OR Blower at 1 speed as well as ozonator, light and 4kw heater. The topside control panel is included.

Placard included for mounting the topside control panel in your existing opening.

HYDCS6206 -U-LFC