Hydroquip Heater 48-0007B

Hydroquip Heater 48-0007Bg is HydroQuip 15" x 2" Versiheat assembly with 60" cord and pressure switch included.

Versi-Heat 9-Pin Retro-Fit, 15" Heater Assembly 60" Cord, Kit.

Also will need to replace hi limit with 34-0201B-K.

On sale now.

C2550-3200ET and 26-0039 indirect replacement - this is a 2 inch heater that may be used to replace the discontinued 3 inch heater, although plumbing modifications will be necessary to bring the plumbing system to 2 inch plumbing.
Not a direct replacement for 3 inch heaters - if using to retrofit the 3 inch flow through heater, plumbing and electrical/sensor modifications are needed.

The black box conceals the power wires and pressure switch. This heater is used to replace an existing HydroQuip Versiheater with a 9 pin cord.

The 9 pin cord style has been discontinued. This heater will serve as a direct replacement.

The power and pressure switch connections will by-pass the old 9 pin wire harness and connect directly to the circuit board.

VersiHeat,HQ,15"x2",9-Pin Retro-Fit Kit, Electronic

Specs

Note if replacing old discontinued heaters that need to be retrofitted to a 2 inch manifold such as 22-78A-040-0545, you would need this heater assembly 48-0007B along with a replacement hi limit sensor 34-0201B.