K-35-SL-3OP Gecko Control Panel and Overlay BDLK353OP

DISCONTINUED

You can still use K-8 0607-007067 though the overlay sticker may show a different button layout for some of the buttons depending on what original overlay was being used with the control panel.

Also note this control panel always had 8 buttons under the overlay, only some overlays did not show all of the buttons for particular control system configurations that do not use all of the functions the control panel is capable of.

Includes: k35.in keypad (0607-007028 or IN.K35.3OP), overlay (9916-101206) / for in.xe 3 output systems. BDLK353OP

6 buttons: Pump 1/Pump 2/Blower/Light/Up/Down
Dimensions: 7'' x 3-1/4''
Cord length: 10'
Includes the 6 button overlay for Pump 1, Pump 2, Blower, Light, Up and Down buttons

Used in Gecko in.XE and Y-Series spa control systems.

Keypad can be programmed.

Setting filter cycle duration
Press and hold Light key until the display shows dxx, with
"xx" being the duration in hours. (Default: 2 hours).
Use Up or Down key to change setting.
0 = no filtration 24 = continuous filtration
Note: it's not recommended to set this to "0".

BDLK353OP