Leak N Seal Swim N Spa 47240440 1 Pint

 Leak N Seal Swim N Spa 47240440 1 Pint of leak sealer for hot tubs. 

This leak sealer product is added to spa water to repair minor leaks and cracks.

DIRECTIONS FOR USE
1. Turn pump off. REMOVE cartridge or filter grids to avoid
product from passing through the filtration system.
2. If the leak location is unknown, add the recommended dosage
to the skimmer. If you are sure of the location of the leak, pour
the recommended dosage directly into the water at the area of
the leak.
3. After 30 minutes following application, turn pump on and allow
to run for at least 8 hours.
4. Check pool or spa to see if it is still losing water. A second
application may be necessary and can be made within the next
24 hours.
5. Replace filter grids or cartridges after 24 hours and resume
normal filtration. Pool or spa may be entered 24 hours after
application.

DOSAGE AMOUNT

IMPORTANT NOTES:
• Remove cartridge or filter grids to avoid product from passing
through filtration system.
• It is possible that fine fountain jets may block when this product
is applied.

Of course if you can identify the leak, it is best to fix the leak at its source. See our hot tub plumbing section for PVC parts and manifolds you may need to complete a plumbing repair.

Leak Sealer and spa chemicals can only be shipped within the continental USA.