Leisure Time pH Balance Stabilizer 45410A

Leisure Time pH Balance Plus stabilizer 45410A is a pH adjuster that comes in this large, 3lb container. 

Increase or decrease spa water pH to maintain the acceptable range of 7.2-7.6 with one handy formulation. 

The pH Balance will stabilize the spa water pH so you don't need to use pH increaser and decreaser. This improved formulation stops pH from moving around. 

Measure pH with a test kit or test strips and adjust.  This is a liquid formulation used in hot tubs.  Note this is not a pH up or down product, but a stabilizer so the pH so it does not move outside the acceptable range.

On a new filled spa that has extremely out of pH water, such as under 7 or over 8, then you will also need spa up or down to get it within the range before using stabilizer. For most applications, if the pH of the water is acceptable on refilling the spa, then this stabilizer is all you need to keep it within the acceptable range of 7.2-7.6.

Note this item can only be shipped within the continental U.S.A.

45410A

This container may be wider and less tall - quantity is 3lbs.

Directions for use:
Add 1-1/2 lbs. (half the jar) of pH Balance Plus for up to 250 gallons of spa water or the entire 3 lbs. for up to 500 gallons of spa water. Pour directly into the spa.
Turn on jets and allow water to circulate for 15 minutes. Temporary cloudiness may occur, but the water will clear quickly once the product is fully dissolved.
Repeat the application each time you refill your spa with fresh water.
Tips: Used to lock in pH until the next refill and formulated for hard water.

Compatible With: Chlorine and bromine sanitizers