Len Gordon Air Button 10 Power Touch Black 951007

DISCONTINUED  in black, we do have the LG15-BLK in black that requires a smaller hole size of 1 3/8"

Other replacement options include:

50-00602 Therm Products also requires the smaller hole size of 1 3/8"

MPT-06060-3428  1 1/4" hole size

B225WF PresAir hole size 1 5/8" in white

B225AB PresAir hole size 1 3/4" in black

Len Gordon air button number 10 Power Touch (2-1/4" Face Diameter), Hole size 1-3/4", Air button, black.  This one operates up to 150 with LGC Momentary Air Switch and 15 with Latching Air Switch

This item is the air button only, not the trim kit. Hole size 1 3/4". The air button should match the type of sensor used. A low volume button may not activate a latching type air sensor and a high volume button may damage a monetary type air sensor. This number 10 button can be used with latching sensors up to 15ft. away and momentary sensors up to 150 ft. away.

This air button is also called an actuator/bellow. The air switch receives the pulse of air from this air bellow/button actuator that is connected by tubing and converts it to an electrical signal within the spa pak for switching a device on either momentarily or latching.

Momentary means press=on and release=off. Latching or alternate means press=on, release=stay on, press again=off, release=stay off. Pushing the actuator/air button/bellow creates enough pressure to operate the air switch. There is complete electrical isolation with no voltage to be concerned with at the control button itself.

Get the 1/8" inner diameter 20 foot long air hose right here at Hot Tub Outpost. We also offer 100 foot rolls of the 1/8" inner diameter air hose.