Len Gordon Air Button Number 4 Lite Touch Gunite White 950410

DISCONTINUED

Len Gordon Air #4 Lite Touch Gunite Air button, white. Fits inside 1" PVC pipe. 

Do not use number 4 buttons with latching type air sensors. Can be used with momentary sensors up to 75 feet away.

#4 Lite Touch™ Gunite

Fits inside 1" pvc pipe

Service Note: Control Distances
The air button should match the type of air sensor in use. A low volume button may not activate a latching air sensor. Likewise, a high volume button may damage a monetary air sensor

Button    Latching             Momentary
#4           Do Not Use        75 Feet
#10        15 Feet              150 Feet
#15        15 Feet              150 Feet

Hole size 1 1/4"

This air button is also called an actuator/bellow. The air switch receives the pulse of air from this air bellow/button actuator that is connected by tubing and converts it to an electrical signal within the spa pak for switching a device on either momentarily or latching.

Momentary means press=on and release=off. Latching or alternate means press=on, release=stay on, press again=off, release=stay off. Pushing the actuator/air button/bellow creates enough pressure to operate the air switch. There is complete electrical isolation with no voltage to be concerned with at the control button itself.This button is for momentary air switches.

Replaces 594391010 , 611466 , 9243-010 , 950410 , 950410-000 , LEN-85-8138 , LG950410000

Get the 1/8" inner diameter 20 foot long air hose right here at Hot Tub Outpost.

We also offer 100 foot rolls of the 1/8" inner diameter air hose.