Len Gordon Air Button Number 4 Lite Touch White 950401

DISCONTINUED -  the internal is still available for the LG4, see LG4INT

Len Gordon Air Buttons #4 Lite Touch Air button, white 950401-000.

Do not use number 4 buttons with latching type air sensors.  This is momentary operation only.

Can be used with momentary sensors up to 75 feet away.

#4 Lite Touch™ air button requires a 1 1/4 inch hole size.

Number 4 air button is used as momentary up to 75 feet away.

Need a latching one? see either number 10 or number 15 instead.

Air buttons are used to provide a pulse of air through air tubing (sold separately) which is connected to an air switch. We offer Presair, Herga and other brand air switches as well.

The air switch receives the pulse of air from this air bellow/button actuator that is connected by tubing and converts it to an electrical signal within the spa pak for switching a device on either momentarily or latching. Momentary means press=on and release=off. Latching or alternate means press=on, release=stay on, press again=off, release=stay off. Pushing the actuator/air button/bellow creates enough pressure to operate the air switch. There is complete electrical isolation with no voltage to be concerned with at the control button itself.

Service Note: Control Distances
The air button should match the type of air sensor in use. A low volume button may not activate a latching air sensor. Likewise, a high volume button may damage a monetary air sensor

Get the 1/8" inner diameter 20 foot long air hose right here at Hot Tub Outpost. We also offer 100 foot rolls of the 1/8" inner diameter air hose.