Maax Spa Control System 110239 BP501T8

Complete replacement control system 110239 with spa pack and topside control for Maax Coleman spas with Free Shipping.

This retrofit kit features the new MXBP20 system that replaces the discontinued BP501T8.

The new bundle includes the new TP700 control panel with overlay 111517.  TP800 are no longer available.    When you order this kit  you will receive the TP700 with TP700 overlay 111517.

110239 Complete Kit includes original:

• 109295 Maax MXBP501G1 replacement MXBP20 spa pack with heater
• 109244 Maax Balboa TP700 control panel (replaces the discontinued TP800 control panel)
• 109253 control panel overlay - 111517 shows Jets 1, Jets 2, Light, Blower and has 5 control buttons.  System now ships with 1x overlay for TP700 (not the 2x TP800 overlays)

Original authentic, current model replacement parts. 

Note this pack kit version is a complete system and the daughter card is also already installed in this set (unlike similar or incomplete sets).

The new system shipping now MXBP20 is the replacement system that will work with 3 pumps, or 2x2-speed pumps and a blower.  When using it with 3 pumps, the third pump will be labelled Blower on the overlay.

See inside of spa pack lid for setup information. We can also assist as needed to chose the correct “SETUP” to make it work for all components in the spa. Contact us by email for assistance as needed.

Voltage Supply: (: 120V or 240V) (BP601: 230V)
Sensors: M7 patented temperature probes
Spa Lights Controls: 1 Amp Max

 Expander capability included in this pack allows for operation of the second 2 speed pump.

• Spa pack with TP700 topside control panel. This control panel is user friendly.  System will support up to two pumps (2 speeds on each) and blower; will not support a dedicated 24 hour circ pump.

If you need a system that supports a 24 hour circ pump, see 110339.

Comes with 5.5kW incoloy heater 5.5 kW 800.

OTHER ITEMS YOU MAY NEED

Wifi Module 50350

Adapter cable available to go from J&J connector to amp plug for pumps & blower if needed, see 101279 CORD, PUMP, 2S 115/230V, 120 inches long AMP.

You may also need the aux control panel 109282 and overlay 109251 auxiliary 2 button control panel.

(Note the 103743 no longer works with this pack. ) 

Note if using a dedicated 24 hour circ pump, see control system 110339 instead.

It is a complete system, the daughter card is already installed.

110239 kit used to come with a TP800 but those control panels were discontinued by the manufacturer and replaced by TP700, so newest supported control panel TP700 included with this system.

Installer notes:

Your installer should chose the correct “SETUP” to make it work for all components you have in the spa.
When installing this spa pack, the setup as documented on the back of the pack lid will need to be adjusted to match the installed equipment in the spa.
Back of the new spa pack lid will show all available setups available to the installing tech.

For installing tech as needed:  To modify Setup:

• With power on, flip up dip switch 1
• On the topside, go to Test, then Setup
• Arrow over to highlight the setup number.
• Use the up/down arrow keys to set spa to the appropriate setup (see pack lid for specifics).
• Select the ‘back’ arrow on the screen to save the setup number.
• Spa will reset. Test equipment.
• Flip down dip switch 1 before you leave

on sale now with free shipping