Marquis Spa Wire 2 Pin Pressure Switch Wire Balboa 600-6217

600-6217 is a pressure switch wire used in Marquis Spas and other brand hot tubs. The pressure switch is a safety device that should never be bypassed during normal spa operation and requires this 2 conductor wire to hook up to spa pack or circuit board.

Marquis Spa Balboa 2 Pin Wire Pressure Switch 600-6217 with 2 Pin Connector and (2) Spade Connectors. wire is 56 inches long.

Need teflon tape? Best to wrap the threads of the pressure switch with teflon tape to assure a good seal at the pressure switch tap on the heater manifold.

one end of wire plugs into circuit board - typically a Balboa board.

these 2 connectors go onto the pressure switch connectors - usually it does not matter in which order since this is only for continuity, but check with your installer for your particular application.