Nordic Hot Tub LED Light Controller 072311

Nordic Hot Tub 072311 LED light controller for up to 40 points of light.

Sequence through 10 color combinations. Daisy Chain style light controller operates at 12 volts AC (12vac).

LIQUALED Accepts bullet and clusters
Accepts perimeter lighting and skirt lights
Can handle 12-40 points of light
Main light is not included.

Need a Gecko adapter for this? See 109530.

Moisture resistant electronics - easy to mount anywhere in the spa's equipment area for Full Spectrum Color Control.
Controlled by the control panel/spa pack - no external 12v power supply required (works on 12 VAC provided by the spa pack)

Positive lock overmold connectors allow for quick installs and reliable connection and the high temp cable sets prevent melted cables due to foam curing. LEDs are operated by topside control of the spa pack.
Low voltage and fused to protect from shock hazard and overheating. Daisy chain wiring for these LiquaLED lighting systems allow for flexible configurations and easy installations.

Spa pack provides the 12 volts VAC to operate. There is also an optional 12 volt power supply 12VDC if using in a non-spa pack application.

All LEDs are controlled by a central Controller such as this one.  Control panel button connected to the spa pack in a hot tub turns LEDs on/off and changes color settings.
Cables daisy-chain together with locking Guardian overmolded connectors and can either be put together in one long string or split into multiple branches.
Controller is protected by in-line fuse

• Max points of lights (not including clusters) 40
• Required input voltage – AC 12 VAC from Spa Pack
• Required input voltage – DC No External DC Supply Required
• Typical max output current / power1 Amp / 12 Watts
• Controller dimensions 3.25ʺ × 2.75ʺ × .75ʺ
• On/Off control  Spa pack light on/off switch on top-side control panel

Extend this assembly with additional LED cables like 072317 dual LED cable or 072322 with 6 lights on the cable.