Nordic Spa Pump Balboa 044028 2HP AquaFlo Replacement

Nordic, Nordic Crown and other spa replacement pump by Balboa model 044028 replaces 044008 and is now rated at 2HP instead of 1.5HP.

• 2 HP Spa Pump
• 115 volts
• Dual Speed Pump
• 2 inch plumbing connection(measures about 3 1/16" across threads)
• (if old pump is 1 1/2 inch plumbing which would be about 2 7/16" across threads, will need to also get 2x 437-251 reducers and 2x new 2 inch pump unions 0602-20  .)

This is the replacement 2-speed 115v pump for the AquaFlo XP2 type plug now a 2HP pump for Nordic Crown, Crown ii spa models.

Pump does not come with cord - use original AMP cord from the original pump or purchase pump cord separately.

Note that the pump wet end rotates in 90 degree increments to line up with your particular plumbing configuration. If rotating the wet end, installer should just pull the bolts out enough to rotate wet end and then re-tighten.

The parts suggested above are to assure a complete replacement. Some pump plumbing can be moved into place to hook up the new, replacement pump while others may need the 3 parts above in order to be connected properly.

If replacing an older pump with different plumbing size attachments, you may need to remove the 1.5 inch plumbing to 2 inch plumbing adapters currently in the existing spa that will need to be removed. They usually come off with the currently installed/old pump.

Actual Pump image not available.

2.0HP Dual Speed Pump – 120V, 60Hz, 2” FBT, 3:00 Wet End Rotation

This part 10044028 or 44028 replaces 10044028, 044008 and 06615686-2 XP2 pump and also replaces the 1.5HP 1016308 as found in Stella MS and other models.