Pump Motor 1 HP 115v 2-Speed 48 Frame AGl-10FL2S-EM1 Emerson US Motor

Emerson/US motor spa pump motor (no wet end) operates at 1 HP, 115v, 2-speed and 48 frame.

• High Amps: 10.3a
• Lo Amps: 3.8a
• 115v
• 1.0 HP
• 48 Frame - Y-Frame thru-bolt motor style
• 2-Speed
• Certified up to 50 degrees C ambient operating temperature (not 40 like the cheaper ones)
• 4x Thru Bolts on a 5.146 Bolt Circle
• 3 1/2"shaft height
• 3/8-16 UNC-2A RH shaft thread
• 5.5" Frame Diameter
• Length: 10.2" (without shaft)
• Class F Insulation
• Open Drip-proof
• Rigid Base
• 3 O'clock Conduit
• Soft Start - gentley delivered voltage torque, gradual power-maximum performance
• 3450/1725 RPM
• Thermally Protected motor - Formerly Emerson Motor Technologies - Now under US Motors

This is a 48 frame, through bolt design dual speed pump motor.  Has threaded shaft and includes the through bolts. Works with hot tub pumps and uses start/run capacitor for efficiency (extra low running amps).

Run capacitor mounted to motor shell, this replacement spa pump motor mounts to 48 frame wet ends.

On sale now with FREE Shipping.

2/4 pole, ball bearings - high speed 3450 RPM, low speed 1725 RPM. Thermally protected motor with auto-reset.

Emerson motors are designed for optimum performance and are used by hot tub pump manufacturers such as Aqua-Flo, Gecko, Balboa and others.

Note that this motor replaces older 1 1/2HP motors that ran on 10.3amps high speed. The amp rating and not the stated horsepower are better indications of matching motors to existing wet ends in the field.

This Emerson Motors by Nidec brand/Formerly Emerson Motor Technologies/ US Motor spa pump motor is a 48 frame thru-bolt type replacement motor for hot tub pumps and above ground pool pumps. This motor model AGL10FL2S works with the 48 frame wet end rated for 1 HP. This is a 2-speed motor with high speed amps of 10.3 a and low speed amps of 3.8a. The pump motor operates at 115 volts and is a 48 frame thru-bolt style pump motor. US Motors is a brand of Nidec Motor Corporation who is a leading manufacturer of commercial, industrial, and appliance motors and controls.