Screw JWB HTA AMH 8-32 x 1/2" 3967000

Write a Review

SKU:: 3967000
UPC:
MPN:: 3967000
Availability:: 3967000
Shipping:: Calculated at Checkout

Now: $1.47

RRP: $2.00

Current Stock:

Quantity:

Description
Warranty Information
0 Reviews

Description

Screw JWB HTA AMH 8-32 x 1/2" 3967000 for Jacuzzi Whrlpool bath part.

Fastener Size	#8
Thread Pitch	32
Jet Part Type	Hardware
Fastener Length	1/2"
Manufacturer	Jacuzzi Whirlpool Bath
Head Type	Pan - Phillips
Model	AMH, HTA
Material	Stainless Steel

1	Screw, JWB HTA/AMH, 8-32 x 1/2"	3967000
2	Venturi Handle, JWB HTA, White	7277940
3	Clamp Ring, JWB HTA, White	7758940
3	Clamp Ring, JWB HTA, Gray	7758953
4	Gasket, JWB HTA, Clamp Ring	1928000
5	Nozzle, JWB HTA, Fixed, White	4881940
5	Nozzle, JWB HTA, Fixed, Almond	4881914
7	Compensator Ring, Wall Thickness, JWB HTA	1925000
8	Nut, Jacuzzi Whirlpool Bath, HTA Jet, 4-1/2" Hole Size	1645000
9	Jet Cmplt,JacWhirl HTA,4-1/2"hs,Dir,Smth,Wht, a1/2"s,1 1/2"s	4870940
9	Jet Cmplt, JWB HTA,4-1/2"hs,Dir,Smth,Almnd,a1/2"s,w1-1/2"spg	4870914

Replacement Parts for the HTA Jet Assembly
To replace the Swivel Assembly and Venturi Handle: Hole size 4-1/2"
Remove 3 screws securing clamping ring and gasket from jet body. Pull swivel ring B (see detail) away from swivel to expose retaining screw A. Remove screw A from swivel. Turn Venturi C counterclockwise until it is unscrewed and free from the swivel. Install new swivel assembly, securing it with clamping ring, gasket and 3 screws. Screws are properly tightened when the swivel assembly can still be manually moved from side to side, but tight enough to allow the Venturi handle to be turned to adjust water without turning the swivel. To install the handle, align the two portions of the swivel assembly with the notches on the handle and snap it on. NOTE: When installed, the handle is permanently in place attempting to remove it will damage the snap-on feature of the handle

View AllClose