Spa Builders AP-4 Control Pack 5.5kW Heater Time Clock 3-70-0217

DISCONTINUED - See the newer control system options:

CS6009-US2  air system

CS6009-US1 air system  - this one would be the recommended unit - should not require much work to install as the heater is easily re-oriented as needed,

CS7000-A-15A air sytem complete (less time clock)

Spa Builders Spa Pack 3-70-0217 with 5.5kW heater and time clock.

120V, 1.5KW, 20AMP, 3 Wire
or 240V, 5.5KW, 30/50AMP, 4 Wire

Operates Equipment:
Pump 1 - 120V, 2-Speed
Blower - 120V, 1-Speed
Light - 12V
Ozone - 120V
Cords: Pump 1, Blower, Light

Topside Control Panel Not Included, Recommend:
AI # 932339-120  Len Gordon 3 Button Digital readout Topside -  

AP-4 120/240V WITH HEATER 5.5KW with TIME CLOCK

Pneumatic (Air) control system by Len Gordon. This system will run 1 pump and a blower as well as a light and ozone options.

System does not come with a topside. Will run 1.5kW at 120 volt and 5.5kW at 240 volt.

Note: There Is No Internal GFCI so you will need one.  Many old packs had a built-in GFCI, but now you need a separate one.

You may need 2x of the AP-4 mounting brackets (not included).