Spa Builders Heater 5.5kW 220V AP-4 C2550-1002

5.5 KW, 220 V AP-4/LX-10  12 inch long heater model C2550-1002.

• Tube Length is 12"
• Tube Diameter is 2.0"
• Pressure Switch is 6 1/2"
• 5.5kW at 220V

Replacement for AP-4 and LX-10 5.5 kw, 220 volt flow through heaters that are 12 inches long and have 2 inch unions/connections.

Includes the 5.5kW heater element mounted inside the heater manifold.

Also replaces C2550-1002ET, 48-3300-10-002H , 48-3300-10-003H. 2-00-0052 , C2550-1002 ,  C2550-1002ET ,  2-00-0108

The old ET meant the heater was coated to ward off initial scale buildup on elements, but they introduced their own set of problems and the failure rates of Teflon coated elements are higher than non-coated. This is a dying trend that came from the ice cream maker industry and was applied to hot tubs before the fallout was realized.  If you are replacing a 1002ET heater, chances are you too have experience the problems associated with a coated heater element.

This 1002ET model replaces the 1002ET and 002H and 003H heaters and is an exact replacement with same length, size and specs.

This heater connects to your 2 inch plumbing.

This heater comes with the 2 heater unions and is used in select Sundance Spas, Aruba spas - perfect replacement for Spa Builders AP4 or LX10 5.5kW heaters.

Need a tailpiece? See 417-5050