Spa Cover Lifter Covermate III Hydraulic

Covermate 3 cover lifter is currently unavailable -     See the newer model Vanish XL  or the top mount lifter hs20.1

This is the factory original, full version of the Leisure Concepts Covermate III cover lifter. Not the cheaper ECO version.

The Covermate III cover lifter attaches to the spa cabinet for a perfect solution to spas inside gazebos or up against walls or obstructions.

Requires 6 inches of clearance at rear and 5 inches clearance at sides.

The hydraulics make lifting the cover simple.

The spa cover lifter with shocks is perfect when there is not much room around the side of the spas. 

This lifter requires just 6 inches of clearance behind the spa vs. 12-18 inches required by standard cover lifters.

No other hydraulic cover lift offers the beauty, reliability and superior operation of the CoverMate III.
Aluminum full-frame construction and stylish composite mounting bracket so no more heavy lifting.

(cover not included)

FREE SHIPPING anywhere in the continental U.S.A. on this cover lifter.

To use this cover lifter, open the cover and fold in half, then grab onto the bar with the foam grip and begin pulling upwards. 

The hydraulic shocks will do most of the lifting for you so that cover is in a fully open position.

Details
Clearance:  Requires just 6 inches of clearance behind the spa and 5 inches on each side
Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting brackets
Ergonomically designed for ease of use
Locking shock prevents unintentional closure
Comes standard with a TowelMate accessory for hanging - up to three towels right where they are needed most

ADDITION OF A LOCKING SHOCK ON ALL COVERMATE III COVER LIFTS

 Leisure Concepts had previously implemented a change in the type of  shocks that were being used with the CoverMate III cover lift.  This change led to the discontinuation of the lock bar. Now they have added (and made standard) a locking shock on every new CoverMate III cover lift to prevent unintentional closure for additional safety and utility.

 Note that the new locking shock according to page 2 of the installation instructions under Operation of the CoverMate III: Important: When closing the spa cover, always make sure to unlock the shock by pushing on the orange stop before pulling the CoverMate down to prevent possible lift damage.

CMIIIPLAST

Available with extended pivot arms(available in either 38" 100280 or 43" lengths 100985 ) or extended coupler bar 100629 for spas over 8 feet in length or width.

Note:

The extended pivot arm (above 8’ in length) comes in 2 sizes.
                100280 (38”) is for 8’-9’    spas
                100985 (43”) is for 9’-10’ spas


Available with optional DeckMount bracket system sold separately
Available with extended brackets for spas with a corner radius larger than 12 inches

For round covers, see the Freestyle Lifter.

Hot Tub Outpost also offers other Leisure Concepts cover lifters.

Lead time on this CMIII model lifter can be 2-3 weeks , or see the vanish-xl

Download Instructions for Covermate III here (pdf):  Covermate III Operating Instructions