Sundance Jacuzzi Speaker Assembly 6560-501

Sundance Jacuzzi Speaker Assembly 6560-501

Designed for use in Sundance/Jacuzzi.  Design change from manufacturer. Now has Spade connectors instead of AMP plug - see below for wiring adaptation as needed.

Comes with faceplate.  This is one speaker. Does not work with remote.

Free shipping in the Lower 48.

Sundance spa SunSound pop up speak assembly.

Tech Note:  WIRING INFORMATION
The speaker no longer ships with AMP type cord, but instead is manufactured with Spade Connectors.  A conversion is possible as needed:

Following procedure is recommended when replacing this speaker.  The replacement speaker will no longer function with a remote (if applicable) since it does not have an IR Sensor.

PROCEDURE

Turn off power to spa

Remove the non-operational speaker and replace it with a new speaker. Note: the replacement speaker has spade connectors, clip and remove them if needing an AMP style connection.

You will notice the new speaker has the following wires:  Solid yellow, yellow with black stripe, solid white, white with black stripe. The wiring harness has the following wires: solid gray, gray with black stripe, solid white, white with black stripe.

Strip appx 1/2 inch off the ends of all eight wires.

Use wire nuts to splice the following (from the speaker harness):

IMPORTANT = You must connect solid to solid and black striped to black striped!

• a)solid yellow to solid gray
• b) yellow with black stripe to gray with black stripe
• c) solid white to solid white
• d) white with black stripe to white with black stripe

Reapply power to the spa and test the stereo system to complete this procedure.