Sundance Spa Jet Assembly HTA 4870940

White Sundance Spa jet assembly: HTA less nut and backup ring.  The HTA body nut (1645000) and the back up ring (1925000) sold separately.

This jet requires a 4 1/2" hole size.  This jet has a 5 1/2 inch face diameter.

The water connection size is 1 1/2" spg and the air connection is 1/2" slip(s).

This directional jet is made by Jacuzzi Whirlpool Bath and comes in the color white and in the smooth jet style.

This is spa jet assembly model HTA.

Contact us if you need further details on this Jacuzzi Sundance Spa jet.

Replacement Parts for the HTA Jet Assembly
To replace the Swivel Assembly and Venturi Handle: Hole size 4-1/2"
Remove 3 screws securing clamping ring and gasket from jet body. Pull swivel ring B (see detail) away from swivel to expose retaining screw A. Remove screw A from swivel. Turn Venturi C counterclockwise until it is unscrewed and free from the swivel. Install new swivel assembly, securing it with clamping ring, gasket and 3 screws. Screws are properly tightened when the swivel assembly can still be manually moved from side to side, but tight enough to allow the Venturi handle to be turned to adjust water without turning the swivel. To install the handle, align the two portions of the swivel assembly with the notches on the handle and snap it on. NOTE: When installed, the handle is permanently in place attempting to remove it will damage the snap-on feature of the handle