Sundance Spa Pop-Up Speaker 6560-501

Sundance Spa Pop-Up Speaker SUN6560-501 includes the faceplate. New Style, Shown Here. This item went Through A Design Change in the middle of 2009. Now has Spade connectors instead of AMP plug - see below for wiring adaptation as needed.

Quality pop up speaker for hot tub use. This speaker is designed to resist spa chemicals, corrosion and UV rays.

The Sundance Spa Logo was Removed and the Gray Color is now darker in color than the previous/discontinued version.

6560-501

Tech Note:  WIRING INFORMATION
The speaker no longer ships with AMP type cord, but instead is manufactured with Spade Connectors.  A conversion is possible as needed:

Following procedure is recommended when replacing this speaker.  The replacement speaker will no longer function with a remote (if applicable) since it does not have an IR Sensor.

PROCEDURE

Turn off power to spa

Remove the non-operational speaker and replace it with a new speaker. Note: the replacement speaker has spade connectors, clip and remove them if needing an AMP style connection.

You will notice the new speaker has the following wires:  Solid yellow, yellow with black stripe, solid white, white with black stripe. The wiring harness has the following wires: solid gray, gray with black stripe, solid white, white with black stripe.

Strip appx 1/2 inch off the ends of all eight wires.

Use wire nuts to splice the following (from the speaker harness):

IMPORTANT = You must connect solid to solid and black striped to black striped!

• a)solid yellow to solid gray
• b) yellow with black stripe to gray with black stripe
• c) solid white to solid white
• d) white with black stripe to white with black stripe

Reapply power to the spa and test the stereo system to complete this procedure.