Versi-Heat 5.5kW 13x2 Inch 9-Pin Retrofit 48-0007A

Replacement heater - Versi-Heat 13 inch, 9 pin retrofit 48-0007A

HydroQuip 13" x 2" Versiheat assembly with 60" cord and pressure switch.

This is the 13 inch heater 48-0007A or see 48-0007B for the 15 inch heater that can also work as a replacement (though it is 2 inches longer)

5.5kW, 230 volt hot tub heater with wiring.

Comes with 60 inch cord.

 The black box conceals the power wires and pressure switch. This heater is used to replace an existing HydroQuip Versiheater with a 9 pin cord.

The 9 pin cord style has been discontinued. This heater will serve as a direct replacement. The power and pressure switch connections will by-pass the old 9 pin wire harness and connect directly to the circuit board.

You may need HQP-851-1009 sensor.

This retrofit system requires the sensor wire be wired directly to the circuit board.

Replaces 22-873-040-0543 , 22-873-050-0543 , 22-873-060-0523 , 22-C73-050-0543 , 48-0007B , 480007A , 480007B