Viking 4 Button Control Panel 91073 Destiny River Retrofit Kit

Factory original Viking spa replacement control panel for the old style Viking Heritage/Destiny River panels that are no longer available like 91060.

This retrofit kit V-91073 comes with:

• Mounting template (as the mounting hole has to be a little larger)
• A set of instructions
• A Destiny River graphics/button overlay replacement.  Note - once the Destiny River overlays are no longer available, the generic Balboa overlay will be sent.
• Mounting screws
• Free Shipping

The topside control panel functions the same as the old one and plugs into the circuit board the same as the old one.

Only the hole in the shell that accepts the control panel needs to be cut a little bigger with a cutting tool so this replacement panel will fit/mount.

Oval elongated panel 7-3/4" x 2-5/16".

Replaces 53635 with modification (hole will need to be enlarged to accommodate new model control panel - template included).
Instructions on how to enlarge the hole, a template to mark the new opening size, new overlay for Destiny River and screws to anchor new topside are included. This new style topside functions the same as the discontinued one and plugs into the circuit board the same as the old one.

Retrofit tips:  
Your installer will first shut down electrical power to the spa for safety, then will remove the cover from the power pack to access the control panel jack to unplug the old control panel and remove cable from spa pack. See included instructions to replace with new control panel.  Note the hole in the shell will need to be slightly enlarged.
To enlarge the hole in the spa shell, installer will place the provided paper template over the existing control panel hole and mark 8 center points.  1/2 inch holes are then drilled at the marked points and a marking device/sharpie is used to outline the replacement panel opening.  Installer will use a power jig saw to cut out the new panel opening along the drawn lines.  Then the new control panel can be installed into the larger opening.

Tools needed include a power jig saw, awl or chisel punch/marking device, sharpie pen, power drill with 1/2 inch drill bit, #1 phillips screwdriver or bit.