Vita Maax Elite Sequencer Control Panel 107605 No Overlay

DISCONTINUED  , see 55472

Original Vita Spa, Maax and Elite spa sequencer control panel 107605 without overlay for the sequencer system that provides a moving massage in select spa models equipped with the sequencer control system and sequencer control valve. 

This panel is just under 4.5 inches in length and is 1.5 inches wide. Shipping latest 4 button clear model.

This control panel works with select  Vita/Maax models that use Sequencer Valve part number 109035.

Note the valve type used with this sequencer control was used in select model Vita Spas, however, QCA Spas and others were using the 4x single black solenoids instead of this one - be sure to order the right solenoid and sequencer parts for your spa or contact us for assistance with your particular spa model.

Magic sequencer valve creates a dynamic massage when controlled by the sequencer electronics.

We also offer a complete sequencer retrofit plumbing kit KT15-SEQUENCER Kit that includes this valve and plumbing parts needed to retrofit this to a spa onto pump 2 or 3 lines without a sequencer.

This is for the 4 button sequencer control panel 107605.  Overlays below are just under 4 inches wide.

Overlay sold separately if needed depending on spa model/type.  This is for the control panel with left screen, but there is also one with 2 buttons on either side and center screen.

• Vita Sequencer Overlay 108065
• Vita Sequencer Overlay 109266
• Maax Sequencer Overlay 109265  On/Start/Off Program Speed Pause
• Generic Sequencer Panel Overlay 107603
• Elite Spa Sequencer Overlay 107604
• Elite Spa Sequencer Overlay 107074  which shows Jets1, Jets2, Jets3 and Air.

 Replaces 55180